Arrowipe Selector Guide

Precision and Control
Wipes offer precise control over where the cleaning chemical is applied. This is particularly useful when you need to target specific areas or objects without over spraying or chemical waste.

Reduced Waste
Wipes are used in a more targeted manner, so naturally minimise waste. With spraying, excess liquid can often end up on surfaces where it’s not needed, leading to further waste.

Portability
Wipes are easily portable and don’t require additional equipment like spray bottles, rags or applicators. This makes them convenient for on-the-go cleaning, especially in remote or outdoor settings.

Controlled Saturation
Wipes can be pre-saturated with a specific amount of cleaning solution, ensuring consistent and controlled saturation levels. This helps maintain the desired concentration of the chemical for effective cleaning and degreasing.

Less Downtime
Wipes are ready to use and don’t require mixing or setup time, making them a quicker and more efficient choice for immediate cleaning needs.

Less Environmental Impact
Wipes typically use less packaging compared to spray bottles and canisters, which can reduce the environmental footprint associated with their disposal.
Manufactured in the UK Reusable tubs and refills packs to support companies zero waste to landfill targets.

• Low odour.
• Reduced hazard to user.
• Helps in reducing VOCs’.
• Non-flammable.
• Wipes format reduces risk of spillage.
• Also available in refill bags to reduce plastic waste.
• Avoids cross contamination from rags or dry wipes.
• Consistent wipe dosing every time.
• Removes the need for decanting of liquids on site.

• Rail Cat No. 007/025234 (wipes)
• Rail Cat No. 007/025235 (refill)

• Low odour.
• Reduced hazard to user.
• Helps in reducing VOCs’.
• Non-flammable.
• Wipes format reduces risk of spillage.
• Also available in refill bags to reduce plastic waste.
• Avoids cross contamination from rags or dry wipes.
• Consistent wipe dosing every time.
• Removes the need for decanting of liquids on site.

• Rail Cat No. 007/025236 (wipes)
• Rail Cat No. 007/025237 (refill)
• Rolls Royce CSS255 Type A,B & D

• Reduced solvent vapour in use.
• Reduced hazard to user.
• Helps in reducing VOCs’.
• Wipes format reduces risk of spillage.

• BAE R10 6026 (cleaning – cold solvent – general purpose)
• Pratt and Whitney SPOP 208 Solvent Wiping – SPMC 216-2 for solvent wipes
• Rail Cat No. 007/025238 (wipes)
• Delta Air Lines Inc: Approved product under GE SPM 70-21-23 manual. Specified cleaning method in the rotor cleaning section of the -8C and -8E manual 72-00-33 cleaning.

• Very low odour improves the working atmosphere and means no drowsiness or dizziness is experienced by users.
• Excellent cost in use savings, with significantly less wastage of product through controlled evaporation before and during application.
• Residue free finish leaves piece ready for next process with no requirement for a secondary clean.
• Removes Engineering Blue without smearing.
• Large wipes reduce consumption, wastage and time.
• An effective degreaser for removing oil, cutting fluid, grease and other general soiling.
• Safe for use on polyurethane and epoxy painted surfaces.

• Rolls Royce CSS255 Type A (Metal Alloys)
• Rolls Royce CSS255 Type B (All Non-Metallic Materials)
• Rolls Royce CSS255 Type D (Suitable as a pre-penetrant preparation)
• Rolls Royce CSS255 Type E (Wipes for Composites/Paint)
• Rolls Royce CSS200
• Rolls Royce CSS226
• Rolls Royce MLC104
• Rolls Royce O/MAT
• ARP1755B
• ASTM F 945-12
• Rail Cat No. 007/007876 (Wipes 1 x 60)
• Rail Cat No. 007/007877 (Refill 1 x 60)

• Convenient portable impregnated degreasing wipes.
• Self-sealing tub for safe storage and extend lifetime.
• Wipe resists tearing, linting and removes ingrained resins, adhesive and inks effectively.
• Minimum residue.
• Can reduce solvent consumption, reducing cost in use and aiding compliance with VOC limits.
• Rolls-Royce plc approved wipe cleaner.

• Rolls Royce OMAT and MLC104 approved
• CSS255 Type A (Solvent) and CSS226 (wipe material)

• Controlled delivery.
• No premixing/waste.
• Avoids cross contamination.
• Non-tainting.
• Low odour, low linting.
• Non-smearing, residue free wipes.

• Rolls Royce CSS255 Type A
• Rolls Royce CSS255 Type B
• Rolls Royce CSS255 Type D
• Rolls Royce CSS255 Type E
• Rolls Royce MLC104
• Rail Cat no. 007/160001

• Low VOC.
• Non-flammable.
• Measured dosing and reduced risk of cross contamination.
• Wipes format reduces risk of spillage and reduces hazard to user.
• Low odour, low linting.
• Removes wet and semi cured sealants.

• ASTM F 945-12
• Rail Cat No. 007/079108
• Rolls Royce CSS204 Type A
• Rolls Royce CSS204 Type C
• Rolls Royce CSS204 Type D
• Rolls Royce MLC104